Opis
Monoblok TATP-12MBDA3Visoko učinkovito ogrevanje in hlajenje
Odlična rešitev za vse vaše potrebe po ogrevanju in hlajenju: okolju prijazna, visoko učinkovita, z izboljšano varnostjo in vzdržljivostjo.
En sistem, več prednosti
Sistem toplotne črpalke vam lahko zagotovi učinkovito ogrevanje pozimi, močno hlajenje poleti in toplo vodo skozi vse leto. Znižajte stroške energije z izboljšano, okolju prijazno možnostjo ogrevanja in hlajenja ter uživajte v optimalni temperaturi doma ne glede na letni čas!
Širok razpon delovanja
Thanks to a high compression ratio compressor, a large heat exchanger, and highly precise system controls, Tesla heat pump is able to maintain normal operating functions at various temperatures. Cooling features will work properly in outside temperatures of up to 46℃, heating will work normally even at -28℃, while maximal water outlet temperature is 60℃.
Air-source system
Based on air to water heat pump technology, Tesla heat pumps can transfer the heat inside, where it is used to heat your home, provide you with hot water etc. This energy is also used for cooling when necessary. Compared to other technologies, heat pumps extract up to 75% of the energy they need to operate from the ambient air.
Connectivity options
You can personalize the system to your needs: for example, you can connect it to a room thermostat, or to a 2-way valve or a 3-way valve in order to change the water flow direction. If the system is connected to a booster heater, you can control the domestic hot water tank heater, and there are also options to connect an additional water circulation pump or an alarm system.
Environmentally friendly
Not only are heat pumps a great solution for your heating and cooling needs, but these devices also require less maintenance, offer improved safety and durability, and are more environmentally friendly. R32 is a highly eco-friendly refrigerant – with 0 ODP, 675 GWP and low carbon footprint, it has a lower impact on the environment.
Tehnične specifikacije
Monoblock
TATP-12MBDA3
Power supply Monobloc Unit V/Ph/H 380-415/3/50
Heating2
Capacity kW 12,2
Rated input kW 2,44
COP 4,96
Heating3
Capacity kW 12
Rated input kW 3,86
COP 3,11
Cooling4
Capacity kW 12
Rated input kW 3
EER 4
Cooling5
Capacity kW 11,7
Rated input kW 4,3
EER 2,75
Seasonal space heating
energy efficiency class7
LWT at 35ºC A+++
LWT at 55ºC A++
LWT at 35ºC 4,82
LWT at 55ºC 3,46
MOP(Maximum overcurrent protection) A 28
DC Inv.Compressor
Model 9KD420ZBA21
Quantity 1
Twin rotary DC inverter
Brand panasonic
RPM rps 3450
Capacity W 12250
Input W 4495
Power Supply Ph-V-Hz 380-415/3/50
Operating Frequency Hz 15~120
Crankcase W 25
Compressor refrigerant Oil ml 1000
Fan Motor
Model CW170A-ZL
Brushless DC motor
Brand WOLONG
Insulation Class E
Safe Class IP24
Output Power x Fan quantity W 170*1
Speed r/min 870
Fan Motor type Axial
Number of fans 1
Air side heat exchanger
a.Number Of Row 3
b.Tube Pitch(a)x Row Pitch(b) mm 19.05*22
c.Fin Pitch mm 1,5
d.Fin Material Aluminum sheet
e.Tube Outside Dia.And Material mm φ7.94
f.Coil Length x Height x Width mm 1050*836*57.15
g.Heat Exchanging Area m2 65
Water pump
brand Shimge
fluid temp 0-110ºC
Ambient temp -25-53ºC
Max pressure 10bar
Protection class IP44
Rated prower 230-50/60Hz
Type canned pump
Power input 4-95W
current 0.04-0.75A
Max Rotating speed 4500r/min
Insulation class class F
Pump head 9m
Max Flow 4.5m3/h
Adapter diameter DN25
Refrigerant(R32) Factory charge kg 1,7
Throttle type Electronic expansion valve
Sound pressure level Monobloc Unit dB(A) 52
Sound power level Monobloc Unit dB 65
Packed dimensions
(W×D×H) Monobloc Unit mm 1465×550×1095
Body dimensions
(W×D×H) Monobloc Unit mm 1385×520×933
Net/Gross weight Monobloc Unit kg 140/151
Operating temperature
range
Cooling ºC -5 ~43
Heating ºC -25~ 35
DHW ºC -25~43
Setting water
temperature range
Cooling °C 5~25
Heating °C 12~65
DHW(tank) °C 30~60
Water circuit
Piping connections inch G1”BSP
Safety valve set pressure MPa 0,3
Flow switch m³/h 0,6
Expansion
tank
Volume L 8
Max. water pressure MPa 0,8
Pre-pressure MPa 0,1
Capacity of the back-up heater kW 3
Water side Type Plate type
Wiring Power wiring mm2 10
Stuffing Quantity 40H/40/20 Unit 66/66/32
Energy efficiency label
data
Colder 55ºC kW 10
35ºC kW 11
Average 55ºC kW 12
35ºC kW 12
Warmer 55ºC kW 13
35ºC kW 11
1. Note: 1. Relevant EU standards and legislation: EN14511; EN14825; EN50564; EN12102; (EU) No
811:2013; (EU) No 813:2013; OJ 2014/C 207/02:2014.
2. Outdoor air temperature 7ºC DB, 85% R.H.; EWT 30ºC, LWT 35ºC.
3. Outdoor air temperature 7ºC DB, 85% R.H.; EWT 47ºC, LWT 55ºC.
4. Outdoor air temperature 35ºC DB; EWT 23ºC, LWT 18ºC.
5. Outdoor air temperature 35ºC DB; EWT 12ºC, LWT 7ºC.
6. Seasonal space heating energy efficiency class tested in average climate conditions.
7. Test standard: EN12102-1
8. Sound pressure level is the maximum value tested under the two conditions of Notes2 and Notes5.
